沼氣鼓風機和根鼓風機配件的清潔過程和檢查工作
The biogas blower is a Roots blower for special gases. 如果使用過程中損壞, 它需要專業的維護人員來維修. 一般來說, 拆卸設備後, 您需要先清潔鼓風機的內部, 然後檢查軸的曲率和圓度. , 使用彩色滲透劑和超聲波檢測檢測來檢查軸表面上是否有裂縫. 檢查葉輪的表面和軸向平面是否有裂縫和水泡. 檢查葉輪的表面和軸向平面是否有摩擦跡象. 如果有划痕, 這種現象主要是由於打擊器在離開工廠後的一段時間內被儲存和運輸而引起的. 變形是由於不適當的衰老治療而發生的.
When the Roots blower or biogas blower accessories are cleaned in a immersion tank, the cleaning liquid in the tank is first heated to above 80 degrees, and then the metal parts to be cleaned are placed in the tank and soaked, supplemented by stirring. After soaking, there are two processes of hot water washing and cold water washing to remove residues on the surface of the fan parts, and then hot compressed air is used to dry the surface to prevent rust. Do not use alkaline solution for cleaning. You can wipe it with gauze and some alcohol.
山東明天機械集團股份有限公司, 有限公司. stated that if the stainless steel wire on the filter screen is found to be deformed or damaged after cleaning the blower accessories, it needs to be replaced in time. When cleaning impurities, pay attention to protecting the mesh on the filter screen to avoid deformation or damage, otherwise the filter screen will not be able to perform as it should after being reinstalled. When cleaning the filter, if the surface of the filter is already very dirty, it needs to be washed with water to achieve a good effect.http://cnrootsblower.com
